Time Lapse - Resin 3D Print - Hex3D - Luke & Yoda - Elegoo Saturn - 4K

This is a time lapse video I took with my Nikon Z5 camera using the very handy ResinLapse cable which has a UV light sensor which is placed in the printer and plugs into your Canon or Nikon camera and takes a picture every time the UV light turns on to cure a layer of the model, resulting in a very smooth time-lapse. Available for purchase here: (I'm not affiliated with them, I just find the product very useful) This model is from the Patreon of Hex3D and is a beautifully detailed model. It is available in the starter pack immediately. The resin I used is Siraya Tech Easy Plant-Based 3D Printer Resin It is inexpensive, easy to use, and ideal for beginners. It's also low-odor and quick curing as you can see from my settings below. The settings I used in ChiTuBox for this print on my Elegoo Saturn printer are: Layer Height: mm Bottom Layer Count: 6 Exposure Time: 2.2 seconds Bottom Exposure Time: 23 seconds Transition Layer Count: 10 Rest Time After Retract: 0.5 seconds Bottom Lift Distance: 6 mm Lifting Distance: 6 mm Bottom Retract Distance: 6 mm Retract Distance: 6 mm Bottom Lift Speed: 40 mm/min Lifting Speed: 60 mm/min Bottom Retract Speed: 130 mm/min Retract Speed: 160 mm/min Ambient Room Temperature: 75° F Under the Advanced Tab: Anti-aliasing: On Grey Level: 3 Image Blur: Off Total print time: 10 hours 46 minutes The printer I used for this print is the Elegoo Saturn. The music is by Joyless2 Please subscribe to this channel if you enjoy my content and stay tuned for more time-lapse videos and more of my ongoing video series on properly supporting models in ChiTuBox. Thank you for watching! #3dprinting #timelapse #3dprintingtimelapse #resin3dprinting #elegoosaturn